Home | Supplements | eBooks | DVDs | Articles | Forum
Truly Huge Bodybuilding and Fitness

Click Here for Free Bodybuilding and Fitness Magazine Subscription

Designing a Workout Routine

Product Reviewed: Pumped Extreme - Kre-Alkalyn Complex Creatine
Rating: 5 Star
Reviewer: Max Mussello

Out of all the Creatine's I've tried, from powdered monohydrate creatine to fancy sounding pre-made stacks, this Kre-Alkylyn complex called Pumped Extreme is hands down the best ever. The first part of this creatine review will be a Pumped Extreme Review, because it is the best creatine supplement that I have ever tried and it has given me the most muscular gains!

Having a sensitive stomach and an aversion to putting chemicals or anything unnatural in my body, this was like a miracle solution for me! Pumped Extreme comes in a capsule format, and you can avoid all the common side effects associated with traditional creatine use such as cramping, diarrhea, indigestion, anxiety attacks, etc. This was my experience anyway, and I cannot tell you that creatine works like illegal steroids, because it doesn't. I can tell you though that I have used many different brands in the past with minimal results, and now that I have used Pumped Extreme I have actually seen some great gains in strength AND muscle SIZE, and I haven't had any negative side affects! I have used it for over a month and a half to date!

For full details go to Pumped Extreme Kre-Alkalyn Creatine

You can also order Pumped Extreme by calling 800-635-8970 or 503-648-1898, 10 am to 6 pm PST

Bodybuilding and Fitness Newsletter 12/14/2022

Designing a Bodybuilding Routine

In order to design a workout routine, you need to develop an understanding of all the factors involved in a bodybuilding program. This article will take you through every step of the process of how to design a workout routine to fit your body type, goals, etc.

Bodypart Training

Bodybuilders group exercises by bodypart and train one muscle group at a time. Working one are with 1-3 exercises ensures that you train it thoroughly. Experience says that this type of training is the most efficient for bodybuilding. (Circuit training, on the other hand, allows you to do movements for different bodyparts back to back with no rest in between).

Every major muscle group should be developed to prevent muscle imbalance and the risk of injury. The major muscle groups include legs (quadriceps, hamstrings, calves, glutes), chest, shoulders, back (Trapezius, lats, erectors), abdominals and arms (biceps, triceps).


You can choose from any number of movements that target a particular muscle group, but beginners should stick with the basics to develop a solid foundation. The first exercise you do for a given bodypart should be a compound movement. (A compound or multijoint movement, unlike an isolation exercise, has movement at two or more joints and thus brings in a greater number of assisting muscle groups. Note: Some bodyparts like biceps, triceps and calves can be worked with pre-dominatantly isolation exercises.)

Some basic movements can be done in a number of ways; for example, you can do a bench press with a barbell, with dumbbells or on a machine. Eventually, you'll learn how to do them all and use the in your training arsenal.

Two similar exercises can target a muscle differently. For example, the bench press is a good exercise for most of the chest, but the incline press (essentially a bench press done on an incline bench) works the upper pectorals more effectively. When you put exercises together to form a routine, you'll want to include those movements that hit the same muscle in different ways. That's why you normally include 2-3 exercises when you work each bodypart.


During the first couple of training sessions, you'll want to go pretty light just to get a feel for how to do the movement correctly. After you feel comfortable with the form, begin adding weight.

Even an experienced lifted should always do his first set as a warm-up with practically no weight to flush to target muscle and connective tissue with blood. On the second set, add a couple of small plates and do the exercise again. Was it still east? If so, and assuming you used good form, add more weight. If you struggled to reach 12 repetitions, add just a little bit of weight. (Adding weight on successive sets is called pyramid training and is one of the safest ways to train.)

Continue adding weight until it becomes tough to complete 8-12 reps. Your goal is to train in the range where you reach muscular failure at 8-12 reps. Once you find a challenging weight, stick with it. So you'll become stronger and be able to increase the number of reps. Once you can do 12, it's time to increase your training poundage by about 10%. At this heavier weight, you won't be able to do 12 reps, but with time you'll once again be able to. Keep working in this fashion.

The principle behind this type of training is known as overload. It states that for improvements to occur, you must impose a demand on your muscles greater than what they're accustomed to (for bodybuilding purposes, about two-thirds of your maximal strength). Your muscles compensate for this strain on the cellular level by adding protein to grow thicker and stronger. At that point, the same load is no longer sufficient to induce further changes, more load must be added. That is, you must progressively add training stimulus to make continued improvements.

Keep track of your training poundage by recording your weights, sets and reps in a training log alongside a list of your exercises.

Some bodybuilders swing and heave, cheating for the sake of pushing heavier weights. Remember, the name of the game here is not weightlifting, but rather bodybuilding.


A set is a combination of any number of reps of a single exercise. As a beginner, you'll normally want to do 1-2 light warm up sets of each movement (especially the first movement for a given bodypart) before doing 1-3 heavier sets. That equals 2-4 total sets per exercise.


A rep is a single execution of one exercise. if you do a set of 10 bicep curls consecutively, that's 10 reps. During your first week or two, keep the weights very light so that you can complete about 15 reps in good form. This is a change for you to practice good form while you work on your neuromuscular coordination and lean the proper 'feel' for the movement. Developing that feel with become even more critical later on because it will tell you if an exercise is working.

After that initial break-in period, to build size and strength you want to do 8-12 reps per set (after your warm-up set of 15 reps, which you should do at the start of each exercise). Use a weight that allows you to do the recommended number of reps and still reach muscle failure.

Muscle failure means that you cannot do any more reps with good form. If you can't do eight strict reps, the weight's too heavy. If you can do more than 12, the weight's too light. Adjust the weight for your next set. (Note: The numbers eight and twelve are not arbitrarily derived. Exercise scientists have conducted numerous tests and have found that working with a weight about 70% of your one-rep maximum produces the fastest results. Most bodybuilders can lift about 70% of their one-repetition maximum 8-12 times).

Though you don't have to train to muscle failure to grow, you need to come pretty close. Bodybuilders call this intensity. How do you know if you're close to working at 100% intensity? Simple: If you can do another rep with good form, do it! If you can do still another, do it.

After you build you base, you may want to experiment with a program that alternates periods of high reps (which build muscle endurance) to medium reps (builds muscle mass) with low reps (builds strength and power) and back up again. This is called cycling. The idea here is to progress to a higher level of strength each cycle. (Note: Advanced strength athletes like powerlifters use slightly different training methods, most notably the number of reps, that do bodybuilders. You'll get stronger as you build muscle, but training to maximuse strength isn't identical to the type of training that maximizes mass.)

Proper Form

We'll say this again and again, but it's far better to use a weight that allows you to perform the movement correctly than to cheat with a heavy weight that will, sooner or later, result in an injury.

Speed of Movement

Use a smooth, controlled motion during all phases of the lift. This deliberate rep speed produces the greatest results for bodybuilding purposes. Super-fast reps with ballistic movements and jerking can be harmful to muscles and connective tissues, while slow training accomplishes very little. In general, most bodybuilders use a formula that approximates a two-second positive contraction (raising the weight), a momentary squeeze of the muscle at the point of peak contraction, and a two-second negative contraction (lowering of the weight).


Most people don't think much about breathing until they begin lifting weights, but it should still come naturally. Start each set with a deep inhalation and exhale as you push through the most difficult part of the lift. Inhale at the top (or the easiest portion of the lift) and exhale as you push.

Rest between Sets

In general, rest as long as it takes for you to feel recovered from your previous set. That normally ranges from 45-90 seconds. Larger muscle groups take a bit longer to recover; smaller muscle groups clear low pH levels are are ready to go more quickly. Don't fall into the all too common mistake of talking with your buddies for 3-4 minutes between sets, during which time your muscle can become cold. This is counterproductive and lengthens the time you spend in the gym.

If you want to emphasize strength, take a little longer rest between sets. On the other hand, less rest means you won't be able to lift as heavy, but you'll be stressing your endurance. Of note: How much you can lift on a given set and the number of reps you do are directly related to the length of your rest period.

Use a Full Range of Motion

Use a full range of motion in your exercise movements. You want to work each target muscle through its natural range of motion for complete development and to prevent injury.

Training Frequency

Say you train your entire body on Monday. Should you do it again on Tuesday, or wait until Wednesday? The answer is that your body requires a minimum of 48 hours to fully recover after exercise, sometimes even longer. Physiological processes at the cellular level require rest and nutrients before you can train that same muscle group again. A good rule of thumb: If you're even slightly sore, you're not ready to train that bodypart again.

If you're an advanced bodybuilder and split up your workout into, for example, one day for upper body and another for lower body, you can train on consecutive days as long as you don't repeat the same workout. As a beginner, you don't want to go more than 96 hours (four days) without training the same muscle group again. Timing too infrequently results in submaximal gains.

The answer for the beginner, then, is to train every 2-3 days (or three times a week). A Monday - Wednesday - Friday (or similar) schedule is ideal.

Training Duration

If you follow the exercises, sets, reps and rest prescription, you should complete your resistance training in about an hour. Never mind those two hour plus sessions; who could possibly maintain the high level of intensity and mental fortitude of a marathon training session? What matters is the quality of your workout measured by the intensity you create, not the length of time you spend in the gym. Remember that.

Click Here for a Chance to Win Free Bodybuilding Supplements